Walls + Forms - Gridwall Display

Gridwall Display

STEP 1: ASSEMBLE GRID PANELS

STEP 2: CONSTRUCT HEADER TOP

STEP 3: ASSEMBLE DISPLAY


STEP 2: CONSTRUCT HEADER TOP	\|	STEP 3: ASSEMBLE DISPLAY

GridWall Panel Step 2a

GridWall Panel Step 2b

Attach the Grid Panel tower utilizing (3) ‘L' channels and (6) saddle clips (2 per side) to secure to base, as shown.

Set the Header Top assembly onto the Grid Panel tower and attach utilizing (3) saddle clips (1 per side) to secure top to grid.

Completed Triangle
Gridwall Display

1. Set wood dowels into pre-
drilled holes on top of panel,
as shown.

2. Slide 60 degree CornerForm
onto the edge of the Signboard.

3. Slide two 60 degree 1/4" (2200)
CornerForms onto remaining edges of Signboard, as shown.

4. Set this assembly onto the top
panel, using dowels for alignment.

STEP 1: ASSEMBLE GRID PANELS

Snap on Grid Adapter (2687)
to long edge of ALL grid panels.
Attach 60 Degree CornerForm

Attach second grid panel into 60 degree CornerForm, as shown. (Refer to ‘CornerForms Assembly')

Now, snap on (2) 60 degree
CornferForms to third grid panel as done previously.

Tilt panel and insert onto grid
panels, starting from the bottom
and continue working upwards.